Call Map More

bespoke rapid deployment kits

WWW.GPRS-CCTV.COM is pleased to now be able to provide our customers with a range of fully constructed, connected and programmed systems.  Giving you the ultimate in quick and easy installation, and allowing you to deliver, the easiest possible solution for implementing a rapid deployment monitoring solution.  

All of these solutions utilise our standard camera, for which details can be found on our home page and specifications page.  The cameras will also still deliver all of the cameras functions, however, these kits are pre-programmed to your specific needs and instructions.  Then fully tested to your satisfaction before shipping.

This ensures you the minimal time onsite, to simply site the unit, and provide power if required, then just check the alignment of the camera, PIR and Illuminator, and your away, safe in the knowledge that the area is secured.  This whole process typically takes around 15 minutes.

Please contact us for design and pricing options for your own bespoke system to meet your own requirements.

void property rapid deployment kit

We have created the void property rapid deployment kit to fill a niche area of security.  This is designed to be quickly deployed and moved between sites, to allow full monitoring of remote buildings, void properties, or any building at all.  This unit does require a 240v mains feed, to supply power to a 12v power supply to run the unit, however the unit is fitted with an internal 12v 7Ah battery, which will continue to run the unit for up to six weeks without any other power source required.  


Therefore this could be temporarily deployed for a few weeks on batteries and brought back to base and charged up if necessary, or even connected to car batteries for a longer duration out in the field.

However should the units power begin to drop, the unit will send an alert message informing you that the batteries are low in the init, and require a service visit to rectify this problem.

What is included in this kit?  This kit comprises of:
1 X METEOR MCE-NEXUS GPRS CAMERA 
1X INTERNAL PIR DETECTOR
1X 50W HALOGEN ILLUMINATOR
INTERNAL 12V-7AH BATTERY
1X 12V-1A POWER SUPPLY
 

The camera will be programmed to to your specifications and fully tested before it is packaged and dispatched to you along with full manuals (installation manual, technical guide, wiring diagram, and software manual), all software and equipment required to reprogram the camera (should you need to) using a standard Windows PC. 

solar powered external rapid deployment kit

We have created the solar powered external rapid deployment kit to fill a niche area of security. This is designed to be quickly deployed and moved between sites, to allow full monitoring of external areas.  This unit does NOT require a 240v mains feed, as it is fitted with a 30W solar panel, and houses an internal 18Ah gel battery to ensure the units all year round continual operation.  


However should the units power begin to drop  (For example due to high activations) the unit will send an alert message informing you that the batteries are low in the init, and require a service visit to rectify this problem.

What is included in this kit?  This kit comprises of:
1 X METEOR MCE-NEXUS GPRS CAMERA
1X EXTERNAL PIR DETECTOR
1X 30W SOLAR PANEL
INTERNAL 12V-18AH BATTERY
MOUNTING BRACKETRY AND STAND AS ABOVE
 

The camera will be programmed to to your specifications and fully tested before it is packaged and dispatched to you along with full manuals (installation manual, technical guide, wiring diagram, and software manual), all software and equipment required to reprogram the camera (should you need to) using a standard Windows PC. 

advisory service 

Our team offers a full advisory service; so if you are not sure of your requirements we can discuss these with you and guide you through the design, purchase and installation of your bespoke system.  This service is free of charge to help guide you and ensure you only purchase what is necessary.
 
Along with the Meteor MCE-NEXUS GPRS camera, we can also supply you with any peripherals you may require, be it cabling, power supplies, PIR detectors, batteries, solar panels, sirens, LED lighting and many other items.  We also offer an installation service for these types of systems and any other peripherals that you may need  at an additional cost (please enquire for further information and individual quotation).  

how to order 

Simply fill in the form on our Contact Us page, and we will email you with a quotation and if required an information form to fill in, telling us how you would like the camera to be programmed (If you require the Pre-Programming Service).  Then send these back to us via email and we will send you an invoice.  Simply pay the invoice easily, and once the funds are cleared we will  build and program your camera/s to your specifications and dispatch your order to you. 

Unfortunately due to the current climate, we do not offer any credit facilities, and all of our business/payments terms are full payment before pre-build and dispatch.  
We apologise for any inconvenience that this may cause.
View full site